(574)533-0445

About Josef Samuel

This author has not yet filled in any details.
So far Josef Samuel has created 268 blog entries.

400# Sandblaster – Large

By |2022-05-15T22:40:29+00:00March 18, 2022|Air Compressors, Sandblasters|

400# Sandblaster – Large

Screw type air compressor required for operation at least 185 CFM.

High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.

1 CUFT CLASSIC BLAST MACHINES

High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.

Model 1028 holds 1/2 cubic foot of abrasive providing approximately 15 minutes of blasting at 80 psi with a No. 3 (3/16-inch) nozzle.

Model 1042 holds 1 cubic foot of abrasive providing approximately 15 minutes of blasting at 80 psi with a No. 4 (1/4-inch) nozzle.

Requirements for Operation

These items are required but not included with this equipment:

Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).

Minimum 12 cfm at 50 psi needed to close the pop-up valve and pressurize the blast machine.

OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.

NIOSH-approved, type CE, supplied-air respirator.

Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).

Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.

Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation

The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

Advantages

One-man portable industrial-quality blast machines manufactured to ASME code.

Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.

MSV abrasive metering valve maintains smooth, consistent, adjustable media flow.

Approvals and Certifications

Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).

100 lb bags of sand $16.00 each (price subject to change)

Rental Rates  
Minimum $322.42
Day $322.42
Weekly $1,289.62

Call to Rent this Item Today!

574.533.0445

Email Us About This Item
Comments Off on 400# Sandblaster – Large

100# Sandblaster – Small

By |2022-05-15T22:42:46+00:00March 18, 2022|Air Compressors, Sandblasters|

100# Sandblaster – Small

Screw type air compressor required for operation at least 185 CFM.

High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.

1 CUFT CLASSIC BLAST MACHINES

High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.

Model 1028 holds 1/2 cubic foot of abrasive providing approximately 15 minutes of blasting at 80 psi with a No. 3 (3/16-inch) nozzle.

Model 1042 holds 1 cubic foot of abrasive providing approximately 15 minutes of blasting at 80 psi with a No. 4 (1/4-inch) nozzle.

Requirements for Operation

These items are required but not included with this equipment:

Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).

Minimum 12 cfm at 50 psi needed to close the pop-up valve and pressurize the blast machine.

OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.

NIOSH-approved, type CE, supplied-air respirator.

Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).

Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.

Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation

The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

Advantages

One-man portable industrial-quality blast machines manufactured to ASME code.

Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.

MSV abrasive metering valve maintains smooth, consistent, adjustable media flow.

Approvals and Certifications

Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).

100 lb bags of sand $16.00 each (price subject to change)

Rental Rates  
Minimum $190.06
Day $190.06
Weekly $760.44

Call to Rent this Item Today!

574.533.0445

Email Us About This Item
Comments Off on 100# Sandblaster – Small

Weed Trimmer W/Saw Blade

By |2022-03-18T20:44:59+00:00March 18, 2022|Lawn & Garden|

Weed Trimmer W/Saw Blade

Four cycle gas engine weed trimmer with a metal saw blade for saplings and other brush-like weeds.

Rental Rates  
Minimum $46.94
Day $75.12
Weekly $225.32

Call to Rent this Item Today!

574.533.0445

Email Us About This Item
Comments Off on Weed Trimmer W/Saw Blade

Weed Trimmer W/String

By |2022-03-18T20:37:21+00:00March 18, 2022|Lawn & Garden|

Weed Trimmer W/String

Four cycle gas engine weed trimmer with a string trimmer head for tall grass and grass-like weeds.

Rental Rates  
Minimum $40.94
Day $65.50
Weekly $196.48

Call to Rent this Item Today!

574.533.0445

Email Us About This Item
Comments Off on Weed Trimmer W/String

Weed Trimmer W/Grass Blade

By |2022-03-18T20:33:04+00:00March 18, 2022|Lawn & Garden|

Weed Trimmer W/Grass Blade

Four cycle gas engine weed trimmer with heavy duty metal grass blade for tall grass and grass-like weeds.

Rental Rates  
Minimum $40.94
Day $65.50
Weekly $196.48

Call to Rent this Item Today!

574.533.0445

Email Us About This Item
Comments Off on Weed Trimmer W/Grass Blade

Woven Wire Fence Stretcher

By |2022-03-18T19:58:24+00:00March 18, 2022|Lawn & Garden|

Woven Wire Fence Stretcher

For installing woven wire fence. Comes with ratchet.

Rental Rates
Minimum $17.87
Day $17.87
Weekly $53.59

Call to Rent this Item Today!

574.533.0445

Email Us About This Item
Comments Off on Woven Wire Fence Stretcher

Chain Link Fence Stretcher

By |2022-03-18T19:54:50+00:00March 18, 2022|Lawn & Garden|

Chain Link Fence Stretcher

For installing chain link fence. Comes with ratchet.

Rental Rates
Minimum $15.39
Day $15.39
Weekly $46.17

Call to Rent this Item Today!

574.533.0445

Email Us About This Item
Comments Off on Chain Link Fence Stretcher

V.C. Floor Tile Cutter

By |2022-03-18T19:48:56+00:00March 18, 2022|Indoor Restoration|

V.C. Floor Tile Cutter

For vinyl composite flooring. Can cut up to 12″ wide pieces.

Rental Rates  
Minimum $20.25
Day $20.25
Weekly $60.74

Call to Rent this Item Today!

574.533.0445

Email Us About This Item
Comments Off on V.C. Floor Tile Cutter

14″ Hand Ceramic Tile Cutter

By |2022-03-18T19:39:56+00:00March 18, 2022|Indoor Restoration|

14″ Hand Ceramic Tile Cutter

Can cut up to 14″ wide ceramic tile.

Rental Rates  
Minimum $23.09
Day $23.09
Weekly $69.25

Call to Rent this Item Today!

574.533.0445

Email Us About This Item
Comments Off on 14″ Hand Ceramic Tile Cutter

4″ Hand Ceramic Tile Cutter

By |2022-03-18T19:36:27+00:00March 18, 2022|Indoor Restoration|

4″ Hand Ceramic Tile Cutter

Can cut up to 4″ wide ceramic tile.

Rental Rates  
Minimum $11.55
Day $11.55
Weekly $34.63

Call to Rent this Item Today!

574.533.0445

Email Us About This Item
Comments Off on 4″ Hand Ceramic Tile Cutter
Go to Top