(574)533-0445

400# Sandblaster – Large

By |2023-01-26T15:17:02+00:00March 18, 2022|Air Compressors, Sandblasters|

400# Sandblaster – Large

Screw type air compressor required for operation at least 185 CFM.

High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.

1 CUFT CLASSIC BLAST MACHINES

High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.

Model 1028 holds 1/2 cubic foot of abrasive providing approximately 15 minutes of blasting at 80 psi with a No. 3 (3/16-inch) nozzle.

Model 1042 holds 1 cubic foot of abrasive providing approximately 15 minutes of blasting at 80 psi with a No. 4 (1/4-inch) nozzle.

Requirements for Operation

These items are required but not included with this equipment:

Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).

Minimum 12 cfm at 50 psi needed to close the pop-up valve and pressurize the blast machine.

OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.

NIOSH-approved, type CE, supplied-air respirator.

Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).

Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.

Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation

The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

Advantages

One-man portable industrial-quality blast machines manufactured to ASME code.

Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.

MSV abrasive metering valve maintains smooth, consistent, adjustable media flow.

Approvals and Certifications

Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).

100 lb bags of sand $16.00 each (price subject to change)

Rental Rates  
Minimum $338.90
Day $338.90
Weekly $1,355.57

Call to Rent this Item Today!

574.533.0445

Comments Off on 400# Sandblaster – Large

100# Sandblaster – Small

By |2023-01-26T15:21:12+00:00March 18, 2022|Air Compressors, Sandblasters|

100# Sandblaster – Small

Screw type air compressor required for operation at least 185 CFM.

High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.

1 CUFT CLASSIC BLAST MACHINES

High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.

Model 1028 holds 1/2 cubic foot of abrasive providing approximately 15 minutes of blasting at 80 psi with a No. 3 (3/16-inch) nozzle.

Model 1042 holds 1 cubic foot of abrasive providing approximately 15 minutes of blasting at 80 psi with a No. 4 (1/4-inch) nozzle.

Requirements for Operation

These items are required but not included with this equipment:

Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).

Minimum 12 cfm at 50 psi needed to close the pop-up valve and pressurize the blast machine.

OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.

NIOSH-approved, type CE, supplied-air respirator.

Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).

Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.

Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation

The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

Advantages

One-man portable industrial-quality blast machines manufactured to ASME code.

Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.

MSV abrasive metering valve maintains smooth, consistent, adjustable media flow.

Approvals and Certifications

Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).

Rental Rates  
Minimum $201.51
Day $201.51
Weekly $806.01

Call to Rent this Item Today!

574.533.0445

Comments Off on 100# Sandblaster – Small

Towable Compressor W/ Well Driver

By |2023-02-14T16:02:41+00:00March 5, 2022|Air Compressors, Plumbing|

Towable Compressor w/ Well Driver

185CFM Towable Compressors. Whether you need a jack hammer, well driver or you need to blow out your sprinklers for winter, Our compressors have the power to get it done fast!

We carry 2 well drivers for shallow wells only (20′-25′ deep wells) we have one for 1 1/4″ Wells and 2″ Wells. Comes with 1- 50′ Air hose.

 

DOES NOT WORK WITH CHINESE PIPE, MUST PURCHASE AMERICAN MADE. CHINESE PIPE IS TOO SOFT AND WILL BE DAMAGED BY WELL DRIVER.

Rental Rates
Minimum $173.75
Day $278.00
Weekly $1,111.95
Extra Hose
Minimum $6.87
Day $11.00
Weekly $32.98

Call to Rent this Item Today!

574.533.0445

Comments Off on Towable Compressor W/ Well Driver

Towable Compressor W/ 400# Sandblaster

By |2023-02-06T18:58:33+00:00March 5, 2022|Air Compressors, Sandblasters|

Towable Compressor w/ 400# Sandblaster

Large 400# (4 cu ft) Sandblaster made by Clemco

High-performance blast cleaning system removes corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. See related literature for additional applications. Machine holds 4 cubic feet of abrasive for up to 30 minutes of continuous blasting at 100 psi with standard No. 5 nozzle (5/16-inch orifice).

Requires screw type compressor.

Rental Rates
Minimum $343.47
Day $549.56
Weekly $2,198.21
Extra Hose  
Minimum $6.87
Day $11.00
Weekly $32.98

Call to Rent this Item Today!

574.533.0445

Comments Off on Towable Compressor W/ 400# Sandblaster

Towable Compressor W/ 100# Sandblaster

By |2023-02-06T19:01:54+00:00March 5, 2022|Air Compressors, Sandblasters|

Towable Compressor w/ 100# Sandblaster

High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.

1 CUFT CLASSIC BLAST MACHINES

High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.

Model 1028 holds 1/2 cubic foot of abrasive providing approximately 15 minutes of blasting at 80 psi with a No. 3 (3/16-inch) nozzle.

Model 1042 holds 1 cubic foot of abrasive providing approximately 15 minutes of blasting at 80 psi with a No. 4 (1/4-inch) nozzle.

Requirements for Operation

These items are required but not included with this equipment:

Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).

Minimum 12 cfm at 50 psi needed to close the pop-up valve and pressurize the blast machine.

OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.

NIOSH-approved, type CE, supplied-air respirator.

Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).

Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.

Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation

The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

Advantages

One-man portable industrial-quality blast machines manufactured to ASME code.

Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.

MSV abrasive metering valve maintains smooth, consistent, adjustable media flow.

Approvals and Certifications

Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).

100 lb bags of sand $16.00 each (price subject to change)

Rental Rates
Minimum $249.03
Day $398.43
Weekly $1,593.70
Extra Hose  
Minimum $6.87
Day $11.00
Weekly $32.98

Call to Rent this Item Today!

574.533.0445

Comments Off on Towable Compressor W/ 100# Sandblaster

Towable Compressor W/ 2 Air Hammers

By |2023-02-14T16:07:54+00:00March 5, 2022|Air Compressors, Concrete Equipment|

Towable Compressor w/ 2 Air Hammers

185CFM Towable Compressors. Whether you need a jack hammer, well driver or you need to blow out your sprinklers for winter, Our compressors have the power to get it done fast!

We have 1-60# Air Hammer and a few 90# Air hammers to choose from, comes with 2-50′ Air hoses

Rental Rates
Minimum $209.52
Day $335.25
Weekly $1,340.92
Extra Hose
Minimum $6.87
Day $11.00
Weekly $32.98

Call to Rent this Item Today!

574.533.0445

Comments Off on Towable Compressor W/ 2 Air Hammers

Towable Compressor W/ 1 Air Hammer

By |2023-02-14T16:08:42+00:00March 5, 2022|Air Compressors, Concrete Equipment|

Towable Compressor w/ 1 Air Hammer

185CFM Towable Compressors. Whether you need a jack hammer, well driver or you need to blow out your sprinklers for winter, Our compressors have the power to get it done fast!

We have 60# or 90# Air Hammers to choose from, comes with 1-50′ Air Hose

Rental Rates
Minimum $188.91
Day $302.26
Weekly $1,209.02
Extra Hose
Minimum $6.87
Day $11.00
Weekly $32.98

Call to Rent this Item Today!

574.533.0445

Comments Off on Towable Compressor W/ 1 Air Hammer

Diesel Towable Compressor

By |2023-02-06T19:16:44+00:00March 5, 2022|Air Compressors|

Diesel Towable Compressor

185CFM Towable Compressors. Whether you need a jack hammer, well driver or you need to blow out your sprinklers for winter, Our compressors have the power to get it done fast! Prices include 1- 50′ Air Hose. Additional 50′ air hoses are available for an additional charge. We carry 3-Air Man Compressors & 1-Doosan Compressor in our inventory. Call for availability.

Rental Rates
Minimum $131.67
Day $210.67
Weekly $842.65
Extra Hose  
Minimum $6.87
Day $11.00
Weekly $32.98

Call to Rent this Item Today!

574.533.0445

Comments Off on Diesel Towable Compressor
Go to Top